Words2Paint.com - How it Works

Words 2 Paint creates easy-to-use stencils for painting decorative lettering on your walls, furniture,
or other flat surfaces.

These stencils temporarily adhere
to the surface allowing you to paint with a wide variety of paints and precision.

The results are beautiful!

Follow the process used below to
create this kid's desk area.

For this desk area, the VinerHand
font was used.

Step 1 Stars were placed on a white wall. The wall was painted blue. The stars were carefully removed. Presto a perfect star appears!
Step 2 The stencil was cut for easier application.
Step 3 Each word was placed on the wall. A level was used for placement.
Step 4 All 4 words were then ready for the next step.
Step 5 The transfer tape was removed. Discarded transfer tape was placed along the sides to protect the wall.
Step 6 The stencil was rubbed for a tight fit. The letters were first painted the same blue color as the wall. This layer of paint provides a seal that will minimize bleeding. (This step is not necessary if dry or cream stencil paints are used.)
Step 7 When the first layer of paint was dry, the letters were painted navy blue.
Step 8 While the paint was still wet, the stencil was removed. Letter interiors remain adhered to the wall.
Step 9 Letter interiors were removed with a tweezers. Small spots were touched up using a fine brush and the blue wall color.
Step 10 We stood back and enjoyed the great lettering!